RailEasy™ Lag Stud
The RailEasy™ Lag Stud is designed for use in short runs and must always be used with a RailEasy™ Tensioner at the opposite end of the cable run. These fittings are available with a right hand and left hand thread. The compression fitting holds the cable using simple hand tools.
GRADE: 316L Stainless Steel
| ITEM | A (CABLE) | B | C | D | THREAD | QTY | WT (LB) |
| 2-Pack | |||||||
| C0980-R004-2 | 5/32˝ | 0.28˝ | 2.25˝ | 0.44˝ | Right Hand | 2 | 0.17 |
| C0980-L004-2 | 5/32˝ | 0.28˝ | 2.25˝ | 0.44˝ | Left Hand | 2 | 0.17 |
RELATED PRODUCTS
RailEasy™ Cable Railing Tensioner
The RailEasy™ Tensioner is the primary cable railing tensioning/fastening device.
RailEasy™ Cable
The RailEasy™ Cable is used for cable railing applications.
RailEasy™ Stud
The RailEasy™ Stud is a component of the flat and round base tensioners.
RailEasy™ Stud Assembly
The RailEasy™ Stud Assembly is used on straight and angled runs by drilling through the post and fixing it to the back side.