ORION I Straight Rail Kit
The ORION I Straight Rail Kit is the standard 6 ft. railing kit for level sections. Each kit includes a top rail, pre-drilled stabilizer and support block assembly.
View Details
ORION I Stair Rail Kit
The ORION I Stair Rail Kit is the standard 6 ft. railing kit for stair sections. Each kit includes a top stair rail, slotted stair stabilizer and support block assembly.
View Details
ORION I 36” Universal Post
The ORION I 36” Universal Post is specifically for use on 36” height railing on level sections. It is designed to be used as an end post or mid post.
View Details
ORION I 42” Universal Post
The ORION I 42” Universal Post is specifically for use on 42” height railing on level sections. It is designed to be used as an end post or mid post.
View Details
ORION I 36” Corner Post w/ Insert
The ORION I 36" Corner Post w/ Insert is used as a "pass-through" corner post on 36” height level sections. The post has through-holes on 2 adjacent sides of the post to allow cable to pass through.
View Details
ORION I 42” Corner Post w/ Insert
The ORION I 42" Corner Post w/ Insert is used as a "pass-through" corner post on 42” height level sections. The post has through-holes on 2 adjacent side of the post to allow cable to pass through.
View Details
ORION I 36” Corner Post
The ORION I 36" Corner Post is used as a corner post on 36" level sections. The corner post is pre-drilled to allow 1/8” stainless steel cable and termination hardware to pass through on one plane.
View Details
ORION I 42” Corner Post
The ORION I 42" Corner Post is used as a corner post on 42" level sections. The corner post is pre-drilled to allow 1/8” stainless steel cable and termination hardware to pass through on one plane.
View Details
ORION I 42” Stair Mid Post, Slotted
The ORION I 42” Stair Mid Post, Slotted is used as standard mid posts on stairs. It features a slotted hole pattern to allow cable to pass through at a 29-41 degree angle range.
View Details
NOVA I Stair Rail Kit
Use the NOVA I Stair Rail Kit for railing on stair sections. The top rail comes in a standard length of 6 feet.
View Details
NOVA I Stair Rail Hardware Kit
Use the NOVA I Stair Rail Hardware Kit along with the Stair Rail Kit. It is used to mount the top rail to the post on stair sections.
View Details
NOVA I Pivoting Fitting Hardware Kit
The NOVA I Pivoting Fitting Hardware Kit is used for mounting the top rail to posts on stair and ramp sections.
View Details
NOVA I Adjustable Angle Hardware Kit
The NOVA I Adjustable Angle Hardware Kit is an adjustable top rail bracket kit for mounting the top rail to angled posts on level sections.
View Details
NOVA I 36” Universal Post
The NOVA I 36” Universal Post is specifically for use on 36” height railing on level section. It is designed to be used as an end post or mid post.
View Details
NOVA I 42” Universal Post
The NOVA I 42” Universal Post is specifically for use on 42” height railing on level section. It is designed to be used as an end post or mid post.
View Details
NOVA I 36” Corner Post
The NOVA I 36" Corner Post is used as a corner post on 36” height level sections. It is pre-drilled to allow 1/8” stainless steel cable and termination hardware to pass through on one plane.
View Details
NOVA I 42” Corner Post
The NOVA I 42" Corner Post is used as a corner post on 42” height level sections. It is pre-drilled to allow 1/8” stainless steel cable and termination hardware to pass through on one plane.
View Details
NOVA I 36” Corner Post w/ Insert
The NOVA I 36" Corner Post w/ Insert is used as a "pass-through" corner post on 36” height level sections.
View Details
NOVA I 42” Corner Post w/ Insert
The NOVA I 42" Corner Post w/ Insert is used as a "pass-through" corner post on 42” height level sections.
View Details
NOVA I 36” ADA Ramp Post
The NOVA I 36” ADA Ramp Post is used as standard mid posts on 36" ramp sections. It features a slotted hole pattern to allow cable to pass through on a 5 degree ramp slope.
View Details
NOVA I Straight Rail Hardware Kit
Use the NOVA I Straight Rail Hardware Kit along with the Straight Rail Kit. It is used to mount the top rail to the post on level sections.
View Details
NOVA I Straight Rail Kit
Use the NOVA I Straight Rail Kit for railing on level sections. The top rail comes in a standard length of 6 feet.
View Details
Spectrum EC Clamp Stair Knuckle, Narrow
The Spectrum EC Clamp Stair Knuckle, Narrow is used for transitioning from 42" height rail sections to in-line stair rails.
View Details
Spectrum Rail End Cap, Male
The Spectrum Rail End Cap, Male is installed on the exposed end of a top rail for a finished look. It features a male connection and is used for capping off top rail ends near and on gates.
View Details
Spectrum 60 Degree Elbow
The Spectrum 60 Degree Elbow is utilized where rail sections meet at a 60 degree angle. It features a rounded corner and female connections.
View Details
Spectrum 45 Degree Elbow
The Spectrum 45 Degree Elbow is utilized where rail sections meet at a 45 degree angle. It features a rounded corner and female connections.
View Details
Spectrum Straight Sidemount
The Spectrum Straight Sidemount is installed on the exposed end of a top rail and mounts into a flat wall or column.
View Details
Spectrum EC Post Adapter Plate
The Spectrum EC Post Adapter Plate is on an EC post to accept the Spectrum Top Rail. This plate features a narrow body to fit in the channel on the underside of the top rail.
View Details
Spectrum EC Clamp Stair Knuckle, Wide
The Spectrum EC Clamp Stair Knuckle, Wide is used for transitioning from 42" height rail sections to perpendicular stair rails.
View Details
ORION Straight Sidemount
The ORION Straight Sidemount is installed on the exposed end of a top rail and mounts into a flat wall or column.
View Details
NOVA I 42” ADA Ramp Post
The NOVA I 42” ADA Ramp Post is used as standard mid posts on 42" ramp sections. It features a slotted hole pattern to allow cable to pass through on a 5 degree ramp slope.
View Details
NOVA I 42” Stair Mid Post, Slotted
The NOVA I 42” Stair Mid Post, Slotted is used as standard mid posts on stairs. It features a slotted hole pattern to allow cable to pass through at a 29-41 degree angle range.
View Details
ORION II Adjustable Angle Hardware Kit
The ORION II Adjustable Angle Hardware Kit is an adjustable bottom rail bracket kit for mounting the bottom rail to angled posts on level sections. Each kit includes lower rail adjustable brackets, screws and square driver.
View Details
ORION II Straight Rail Kit
The ORION II Straight Rail Kit is the standard 6 ft. railing kit for level sections. Each kit includes a top rail, bottom rail, pre-drilled stabilizer and support block assembly.
View Details
ORION II Straight Rail Hardware Kit
The ORION II Straight Rail Hardware Kit is for mounting the bottom rail to posts on level sections. Each kit includes lower rail brackets, screws, screw hole covers and square driver.
View Details
ORION II Stair Rail Kit
The ORION II Stair Rail Kit is the standard 6 ft. railing kit for stair sections. Each kit includes a top stair rail, bottom stair rail, slotted stair stabilizer and support block assembly.
View Details
ORION II Stair Rail Hardware Kit
The ORION II Stair Rail Hardware Kit is for mounting the bottom rail to posts on stair sections. Each kit includes lower rail stair brackets, screws, screw hole covers, square driver and templates.
View Details
ORION II 42″ Cable Stabilizer
This stabilizer is designed specifically for use with the ORION II System. It is pre-drilled to match the spacing on ORION II posts.
View Details
ORION II 36” Universal Post
The ORION II 36” Universal Post is specifically for use on 36” height railing on level sections. It is designed to be used as an end post or mid post.
View Details
ORION II 42” Universal Post
The ORION II 42” Universal Post is specifically for use on 42” height railing on level sections. It is designed to be used as an end post or mid post.
View Details
ORION II 36” Corner Post
The ORION II 36" Corner Post is used as a corner post on 36" level sections. The corner post is pre-drilled to allow 1/8” stainless steel cable and termination hardware to pass through on one plane.
View Details
ORION II 42” Corner Post
The ORION II 42" Corner Post is used as a corner post on 42" level sections. The corner post is pre-drilled to allow 1/8” stainless steel cable and termination hardware to pass through on one plane.
View Details
ORION II 36” Corner Post w/ Insert
The ORION II 36" Corner Post w/ Insert is used as a "pass-through" corner post on 36” height level sections. The post has through-holes on 2 adjacent sides of the post to allow cable to pass through.
View Details
ORION II 42” Corner Post w/ Insert
The ORION II 42" Corner Post w/ Insert is used as a "pass-through" corner post on 42” height level sections. The post has through-holes on 2 adjacent sides of the post to allow cable to pass through.
View Details
ORION II 42” Stair Mid Post, Slotted
The ORION II 42” Stair Mid Post, Slotted is used as standard mid posts on stairs. It features a slotted hole pattern to allow cable to pass through at a 29-41 degree angle range.
View Details
ORION Stair Bottom Post, Undrilled
The ORION Stair Bottom Post, Undrilled is used as the standard bottom post on stairs. It is undrilled due to stair angle variations.
View Details
ORION 42” Undrilled Post
The ORION 42” Undrilled Post is typically used as a top stair post when transitioning from a 42" level section. It is undrilled due to stair angle variations.
View Details
ORION 36” Undrilled Post
The ORION 36” Undrilled Post is typically used as a top stair post when transitioning from a 36" level section. It is undrilled due to stair angle variations.
View Details
ORION Splice Post Cap
The ORION Splice Post Cap is commonly used on mid posts to join top rails on level sections. It features female connections to allow for ORION top rails to be cut to length and concealed within the fitting.
View Details
ORION Pivoting Post Cap
The ORION Pivoting Post Cap is an adjustable fitting that is typically used on mid and bottom stair posts to join top rails on stair sections.
View Details
ORION Termination Cap
The ORION Termination Cap is installed on the unused side of a post cap fitting for a finished look. This rail cap is available in black, bronze and white colors and a matte textured finish.
View Details
ORION Rail Cap
The ORION Rail Cap is installed on the exposed end of a top rail that extends beyond the post for a finished look. It features a female connection to allow for the ORION top rail to be cut to length and concealed within the cap.
View Details
ORION Stair Knuckle
The ORION Stair Knuckle is an adjustable fitting for transitioning from 36" height rail sections to in-line stair rails.
View Details
ORION Post Mount Stair Knuckle
The ORION Post Mount Stair Knuckle is an adjustable fitting for transitioning from 42" height rail sections to in-line or perpendicular stair rails.
View Details
ORION 90 Degree Elbow Post Cap
The ORION 90 Degree Elbow Post Cap is utilized where rail sections meet at a 90 degree angle. It features female connections. The ORION Top Rails can be cut to length and concealed inside for a clean look.
View Details
ORION 60 Degree Elbow Post Cap
The ORION 60 Degree Elbow Post Cap is utilized where rail sections meet at a 60 degree angle. It features a rounded corner and female connections. The ORION Top Rails can be cut to length and concealed inside for a clean look.
View Details
ORION 45 Degree Elbow Post Cap
The ORION 45 Degree Elbow Post Cap is utilized where rail sections meet at a 45 degree angle. It features a rounded corner and female connections. The ORION Top Rails can be cut to length and concealed inside for a clean look.
View Details
Spectrum Touch-Up Paint
Use Spectrum Touch-Up Paint to touch-up any scratches which may occur to the powder coat finish during the installation process.
View Details
Spectrum Rail Mount Stair Knuckle
The Spectrum Rail Mount Stair Knuckle is an adjustable fitting for transitioning from 36" height rail sections to perpendicular stair rails.
View Details
Spectrum Rail Cap, Notched
The Spectrum Rail Cap, Notched is installed on the exposed end of a top rail in proximity to gates for maximum clearance. It is used for capping off top rail ends on the gate and on either side of the gate opening.
View Details
Spectrum Wide Splice
The Spectrum Wide Splice mates top rail sections. It features a female connection to allow for the Spectrum Top Rail to be cut to length and concealed within the splice.
View Details
Spectrum Top Rail
The Spectrum powder-coated aluminum top rail is available in standard and special Spectrum colors and in lengths of 4', 6' and 8'. It can be cut to length and concealed inside associated fittings for a clean look.
View Details
Spectrum Rail Cap
The Spectrum Rail Cap is installed on the exposed end of a top rail for a finished look. It features a female connection to allow for the Spectrum Top Rail to be cut to length and concealed within the cap.
View Details
Spectrum 90 Degree Elbow
The Spectrum 90 Degree Elbow is utilized where rail sections meet at a 90 degree angle. It features a rounded corner and female connections. The Spectrum Top Rails can be cut to length and concealed inside for a clean look.
View Details
Spectrum Stair Knuckle
The Spectrum Stair Knuckle is an adjustable fitting for transitioning from 36" height rail sections to in-line stair rails.
View Details
Spectrum Clamp Stair Knuckle
The Spectrum Clamp Stair Knuckle is used for transitioning from 42" height rail sections to in-line or perpendicular stair rails.
View Details
Spectrum Gate
The Spectrum Gate Kit is available for a 36" or 42" height Spectrum Cable Railing System. These gate kits come standard with pre-installed cable and fittings.
View Details
Spectrum Gate Latch Post
The Spectrum Gate Latch Post is used on the latch side of the Spectrum Gate. It available for a 36" or 42" height Spectrum Cable Railing System.
View Details
Spectrum Gate Hinge Post
The Spectrum Gate Hinge Post is used on the hinge side of the Spectrum Gate. It available for a 36" or 42" height Spectrum Cable Railing System.
View Details
Spectrum Gate Hardware Kit
The Spectrum Gate Hardware Kit includes everything needed to properly install a Spectrum Gate onto the Spectrum Gate series Latch and Hinge Posts.
View Details
HandiSwage™ Termination Stud
The HandiSwage™ Termination Stud is a “fixed” fitting used in conjunction with a HandiSwage™ Stud on the opposing end of a cable run.
View Details
RailEasy™ Spare Cone & Wedge Set
The RailEasy™ Spare Cone & Wedge Set are an extra set of cones and wedges to have on hand. The wedges are located in the cone of each RailEasy™ component.
View Details
HandiSwage™ Replacement Caps
HandiSwage™ Replacement Caps are extra caps for the HandiSwage™ Cover Nut Sets.
View Details
Plastic Stair Spacer
The Plastic Stair Spacer is ideal for stair applications where a “through post” fitting is being utilized to achieve an angled cable run.
View Details
NOVA II Stair Rail Section Hardware Kit
Use the NOVA II Stair Rail Section Hardware Kit along with the Stair Rail Section Kit.
View Details
NOVA II Straight Rail Section Hardware Kit
Use the NOVA II Straight Rail Section Hardware Kit along with the Straight Rail Section Kit.
View Details
Surface Mount Hardware Kit
The Surface Mount Hardware Kit is used to surface mount Spectrum posts to wood structures.
View Details
42” Fascia End/Corner Post Hardware Kit
The 42” Fascia End/Corner Post Hardware Kit is used to fascia mount Spectrum end or corner posts to wood structures.
View Details
Fascia Mount Hardware Kit
The Fascia Mount Hardware Kit is used to fascia mount Spectrum posts to wood structures.
View Details
42” Fascia Mount End & Corner Post Kit
The Spectrum 42” Fascia Mount End & Corner Post Kit is an option specifically for use on 42” height railing on level section. It is designed to be used as an end or corner post.
View Details
Wiring Harness Grommet
This Wiring Harness Grommet is used for installing Micro Star™ LED Light Bars on NOVA II Systems.
View Details
HandiSwage™ Hex Head Termination
The HandiSwage™ Hex Head Termination is a “fixed” termination fitting used in conjunction with a HandiSwage™ Stud on the opposing end.
View Details
HandiSwage™ Flat Head Termination
The HandiSwage™ Flat Head Termination is a “fixed” termination fitting used for added clearance on gates in conjunction with a HandiSwage™ Stud on the opposing end.
View Details
HandiSwage™ Tensioner w/Stud
The HandiSwage™ Tensioner with Stud is used in architectural cable railing applications. Angles up to 45 degrees for use on stairs.
View Details
Aluminum Cable Stabilizer Stair Kit
The Aluminum Cable Stabilizer Stair Kit is designed specifically for stairs where post to post measurement spans over 4'.
View Details
NOVA II 42” Stair Mid Post Kit
The NOVA II 42” Stair Mid Post Kit is specifically for use on 36” height railing on stair section.
View Details
NOVA II Touch-Up Paint
Use NOVA II Touch-Up Paint to touch-up any scratches which may occur to the powder coat finish during the installation process.
View Details
NOVA II Post Mounting Hardware Kit
The NOVA II Post Mounting Hardware Kit is used to surface mount NOVA II posts to wood structures.
View Details
NOVA II Cover Nut Set
The NOVA II Cover Nut Set is used with the 1/8” HandiSwage Standard Stud for tensioning capabilities.
View Details
Single Mount Tensioner
Single Mount Tensioners are used at each end of a cable run on stair sections to tension the cable. They can achieve angles up to 45 degrees.
View Details
NOVA & ORION Stud
Supplied with NOVA and ORION 36” and 42” corner posts, these studs are threaded into the post and mechanically attached to the cable using simple wrenches.
View Details
NOVA II Stair Rail Section Kit
Use the NOVA II Stair Rail Section Kit for railing on stair sections. Offered in 6 foot standard lengths and include mounting hardware.
View Details
NOVA II Straight Rail Section Kit
Use the NOVA II Straight Rail Section Kit for straight railings on level sections. Offered in 6 foot standard lengths and include mounting hardware.
View Details
Spectrum ADA Handrail Mounting Bracket
The Spectrum ADA Handrail Mounting Bracket features a clamp that fits onto a Spectrum post and allows for the attachment of rail end and mid support fittings, which enables the system to be ADA compliant.
View Details
Spectrum Wide Mounting Plate
The Spectrum Wide Mounting Plate is twice the width of the standard mounting plates included in the Spectrum post kits and is used when a wider top rail is desired.
View Details
Spectrum Reinforcing Channel
The Spectrum Reinforcing Channel is used in applications where the handrail needs additional structural reinforcement.
View Details
Spectrum Corner Mending Plate Set
Corners on a Rail System require “double posting”. The Spectrum Corner Mending Plate Set is used to join the top mounting plate assemblies included in each post kit when “double posting”.
View Details
NOVA 42” Stair Post Kit, Undrilled
The NOVA 42” Stair Post Kit post is used as the “bottom stair post” on 36” height stair rail sections. It is undrilled due to stair angle variations.
View Details
NOVA 36” Stair Post Kit, Undrilled
The NOVA 36” Stair Post Kit is used as the “top stair post” on 36” height stair rail sections. It is undrilled due to stair angle variations.
View Details
NOVA II 42” Corner Post Kit
The NOVA II 42” Corner Post Kit is specifically for use on 42” height railing on level section.
View Details
NOVA II 36” Corner Post Kit
The NOVA II 36” Corner Post Kit is specifically for use on 36” height railing on level section.
View Details
NOVA II 42” Universal Post Kit
The NOVA II 42” Universal Post Kit is specifically for use on 42” height railing on level section.
View Details
NOVA II 36″ Universal Post Kit
The NOVA II 36” Universal Post Kit is specifically for use on 36” height railing on level section.
View Details
Spectrum 38″ Surface Mount Stair Post Kit
The Spectrum 38” Surface Mount Stair Post Kit is an option specifically for use on 36” height stair railing section.
View Details
Spectrum 38″ Fascia Mount Stair Post Kit
The Spectrum 38” Fascia Mount Stair Post Kit is an option specifically for use on 36” height stair railing section.
View Details
Spectrum 42″ Surface Mount Post Kit
The Spectrum 42” Surface Mount Post Kit is an option specifically for use on 42” height railing on level section.
View Details
Spectrum 42″ Fascia Mount Post Kit
The Spectrum 42” Fascia Mount Post Kit is an option specifically for use on 42” height railing on level section.
View Details
Spectrum 36″ Surface Mount Post Kit
The Spectrum 36” Surface Mount Post Kit is an option specifically for use on 36” height railing on level section.
View Details
Spectrum 36″ Fascia Mount Post Kit
The Spectrum 36” Fascia Mount Post Kit is an option specifically for use on 36” height railing on level section.
View Details
HandiSwage™ Cover Nut Sets
Designed for use with HandiSwage™ Studs and RailEasy™ Stud Assembly.
View Details
Acorn Nut Set
The Acorn Nut is designed for use with HandiSwage™ swage studs and RailEasy™ Stud Assemblies.
View Details
RailEasy™ Cable Railing Tensioner
The RailEasy™ Tensioner is the primary cable railing tensioning/fastening device.
View Details
HandiSwage™ Cable Sleeve Flush
The HandiSwage™ Cable Sleeve Flush is designed to protect your wood posts from chafing and incidental damage from cable rubbing around the outside of your mid post cable holes.
View Details
RailEasy™ Adjustable Sidemount Oval
The oval adjustable sidemount allows for the mounting of 2” stainless steel railing on posts as narrow as 3”.
View Details
RailEasy™ Cable Sleeve Flush
The RailEasy™ Cable Sleeve Flush is designed to protect your wood posts from chafing and incidental damage from cable rubbing around the outside of your mid post cable holes.
View Details
Spectrum Surface Mount Cable Stabilizer Kit
The Spectrum Surface Mount Cable Stabilizer Kit is designed specifically for use in a Spectrum surface mounted system where post to post measurement spans over 4’.
View Details
RailEasy™ Straight Sidemount Oval
The oval sidemount allows for the mounting of 2" stainless steel railing on posts as narrow as 3".
View Details
Stabilizer and SunRail™ Cable Grommets
Use these grommets with the Cable Stabilizers or SunRail™ systems.
View Details
Rail Foot Support Bracket
This one-piece bracket is used in applications where a foot rail is required.
View Details
Rail Stair End Connector
Rail Stair End Connector design allows fitting to go into end posts on ramps or stairs, placing the fulcrum into the center of the post and allowing adjustment to 45 degrees up or down.
View Details
Rail Stair Double Connector
The Rail Stair Double Connector design allows fitting to go through intermediate posts on ramps or stairs, placing the fulcrum into the center of the post and allowing adjustment to 45 degrees up or down.
View Details
Rail Tee Connector
This rail fitting allows the connection of a 1-1/2" continuous top rail to a 2" tubular post at any desired location.
View Details
Rail Center Support
This part is attached to the outside of 2" tubing.
View Details
Rail Connector Right Hand
Use one left hand and one right hand Rail Connector to abut as close as 90 degrees and as wide as 135 degrees on the same post.
View Details
Rail Connector Left Hand
Use one left hand and one right hand Rail Connector to abut as close as 90 degrees and as wide as 135 degrees on the same post.
View Details
Rail Connector Straight
The Rail Connector Straight is used at end or mid posts where bottom rails are desired.
View Details
Rail Adjustable Joint Right Hand
Use one left hand and one right hand Rail Adjustable Joint for elevation changes.
View Details
Rail Adjustable Joint Left Hand
Use one left hand and one right hand Rail Adjustable Joint for elevation changes.
View Details
Rail Adjustable Joint Straight
The Rail Adjustable Straight Joint is used for stairs or other elevation changes, up or down to 45 degrees.
View Details
Rail Knuckle Joint 1-1/2˝
This Rail Knuckle Joint is used in 1-1/2" stainless steel handrail applications.
View Details
Rail Knuckle Joint 2˝
The Rail Knuckle Joint is used for the "smooth top" look in SunRail™ systems.
View Details
Rail Connector
The Rail Connector is primarily used in stainless steel handrail applications as an insert between two lengths of tubes to connect and strengthen the joint.
View Details
Rail Adjustable 3-Way
Rail Adjustable 3-Way is horizontally or vertically adjustable and used for the "smooth top" look.
View Details
Rail 3-Way Corner 90 Degree
The Rail 3-Way Corner used for the "smooth top" look.
View Details
Rail Adjustable Tee
The Adjustable Tee is used for the "smooth top" look on stair or ramp applications.
View Details
Rail Tee 90 Degree
This modular fitting is used with SunRail™ systems.
View Details
Rail Elbow 90 Degree Round
This rounded elbow is primarily used in SunRail™ systems as a "smooth top" look.
View Details
Rail Elbow 90 Degree Square
The square elbow is used as a modular component in a SunRail™ system.
View Details
Rail Flat Top Cap
The Flat Top Cap closes posts and tubing after installation is complete, creating a seamless fit.
View Details
Rail Dome Top Cap
The Dome Top Cap closes posts and tubing after installation is complete for a seamless look.
View Details
Rail Mid Support Adjustable
The Adjustable Mid Support is used where a "smooth top" continuous handrail is required and where angle adjustments are needed.
View Details
Rail Center Guide
This guide allows a continuous 2" handrail to be placed on top of a vertical 2" tubular post.
View Details
Rail Support 2˝ Tube Mount
This rail support mount is used in conjunction with the stainless steel end and mid supports.
View Details
Rail Support Flat Base
This rail support mount is used in conjunction with the stainless steel end and mid supports.
View Details
Handrail Bracket 1-1/2
This Handrail Bracket is designed for a continuous handrail.
View Details
Rail Mid Support
The Rail Mid Support is designed for continuous handrail to pass through.
View Details
Rail Corner Tube Mount
The Rail Corner Tube Mount is used in a SunRail™ ADA compliant handicap railing system.
View Details
Glass Panel Base
The heavy duty Glass Panel Base is used with 3/8” to 1/2” thick glass.
View Details
Glass Panel Connector – Flat
This glass panel connector is used with 3/8” to 1/2” thick glass and mounts to flat surfaces including Spectrum posts.
View Details
Glass Panel Connector – 3/8˝
This Glass Panel Connector utilizes a 5/16" to 3/8" thick glass.
View Details
Glass Panel Connector – 1/2˝
This heavy duty glass panel connector uses 3/8" to 1/2" thick glass.
View Details
RailEasy™ Glass Panel Kit
The RailEasy™ Glass Panel Kit is used for the RailEasy™ Glass Panel System.
View Details
Cable Stabilizer Kit for 2˝ Round Tubing
The Cable Stabilizer Kit is designed specifically for use where post to post measurement spans over 4’.
View Details
Rail Base Side Shim
The Side Shim is used under the side of a Rail Mounting Base, Rail Adjustable Base and Rail Base Flat Mount if mounting surface is uneven.
View Details
Rail Base End Shim
This shim is used under the end of a Rail Mounting Base, Rail Adjustable Base and Rail Base Flat Mount if mounting surface is uneven.
View Details
Rail Base Shim
The Base Shim fits under the Rail Mounting Base, Rail Adjustable Base and Rail Base Flat Mount.
View Details
Rail Base Flat Mount
This flat mount is used to secure a railing system to a concrete surface.
View Details
Rail Base Bracket
This bracket is designed to be combined with the Rail Mounting Base or Rail Adjustable Base.
View Details
Rail Adjustable Base
The adjustable rail base has a longer adjustable connector for better stability of the post.
View Details
Rail Mounting Base
The Rail Mounting Base features a through-hole for electrical wiring and is made from grade 316 stainless steel.
View Details
Rail Base Plate Round
The Rail Base Plate Round is offered in an 1-1/2" diameter, making it ideal for handrail use.
View Details
Rail Base Plate Oval
The oval rail base plate features a different shape than the standard RailEasy™ Sidemount and is made from grade 316 stainless steel for maximum corrosion resistance and durability.
View Details
RailEasy™ Swivel End – Round
The RailEasy™ Swivel End is used for cable railing applications.
View Details
RailEasy™ Tensioner – Round
The RailEasy™ Tensioner Round is used in SunRail™ and Latitude Cable Railing applications.
View Details
Spectrum, NOVA and ORION System Cable Grommets
These grommets are used with 1/8” cable for the Spectrum or NOVA Systems. They snap onto the cable and slide into post and stabilizer holes.
View Details
HandiSwage™ Flush Fitting
The HandiSwage™ Flush Fitting is perfect for cable railing applications where "through post" hardware is desired for minimal obstruction.
View Details
HandiSwage™ Cable Sleeve
The HandiSwage™ Cable Sleeve is designed to protect your wood posts from chafing and incidental damage.
View Details
HandiSwage™ 1/8″ Cable
This cable features a 1x19 construction and is available in a 1/8" diameter. Spools are available in 100' or 250'.
View Details
HandiSwage™ Tensioner
The HandiSwage™ Tensioner is used in architectural cable railing applications. Angles up to 45 degrees for use on stairs.
View Details
HandiSwage™ Lag Stud
The HandiSwage™ Lag Stud is designed for use in short runs and must always be used with a tensioning device.
View Details
HandiSwage™ Short Stud
The HandiSwage™ Short Stud is ideal for cable railing applications where minimal obstruction is desired.
View Details
HandiSwage™ Long Stud
The HandiSwage™ Long Stud is perfect for architectural cable railing applications where "through post" hardware is desired for minimal obstruction.
View Details
HandiSwage™ Standard Stud
The HandiSwage™ Standard Stud makes installing an architectural cable railing system quick and easy.
View Details
Stair Spacer
The Stair Spacer is ideal for stair applications where a “through post” fitting is being utilized to achieve an angled cable run.
View Details
RailEasy™ Wedges
The wedges are located in the cone of each RailEasy™ component.
View Details
RailEasy™ Cones
The tensioner cone is where the spacer and wedge are housed.
View Details
RailEasy™ Tubing
RailEasy™ Tubing is made from grade 316 stainless steel for maximum durability and corrosion resistance.
View Details
Aluminum Cable Stabilizer Kit
This stabilizer kit is designed specifically for use where post to post measurement spans over 4'.
View Details
RailEasy™ Mid Post Kit
The Mid Post is designed specifically for use where post to post measurement spans over 4’.
View Details
Stainless Steel Cable Stabilizer Stair Kit
The Stainless Steel Cable Stabilizer Stair Kit is designed specifically for stairs where post to post measurement spans over 4'.
View Details
Stainless Steel Cable Stabilizer Kit
The Cable Stabilizer Kit is designed specifically for use where post to post measurement spans over 4'.
View Details
RailEasy™ Adjustable Sidemount
The adjustable sidemount features a patented design to accept any angle up to 45 degrees in one of four directions.
View Details
RailEasy™ Straight Sidemount
The outside dimension of the sidemount matches the width of a standard vinyl post, and other types of standard 4" x 4" posts.
View Details
Deluxe Cover Nut Set
Designed for use with the HandiSwage™ Studs and RailEasy™ Stud Assembly.
View Details
RailEasy™ Cable
The RailEasy™ Cable is used for cable railing applications.
View Details
RailEasy™ Stud
The RailEasy™ Stud is a component of the flat and round base tensioners.
View Details
RailEasy™ Flush Fitting
The RailEasy™ Flush Fitting is perfect for cable railing applications where "through post" hardware is desired for minimal obstruction.
View Details
RailEasy™ Stud Assembly
The RailEasy™ Stud Assembly is used on straight and angled runs by drilling through the post and fixing it to the back side.
View Details
RailEasy™ Lag Stud
The RailEasy™ Lag Stud is designed for use in short runs and must always be used with a RailEasy™ Tensioner at the opposite end of the cable run.
View Details
RailEasy™ Swivel End
The RailEasy™ Swivel End is used for cable railing applications.
View Details
Bilt App for RailEasy™ Cable Railing System
BILT is a revolutionary way of providing assembly instructions through a 3D and interactive format.
View Details
RailEasy™ Cable Sleeve
The RailEasy™ Cable Sleeve is designed to protect your wood posts from chafing and incidental damage from cable rubbing around the outside of your mid post cable holes.
View Details
