The Spectrum EC Clamp Stair Knuckle, Narrow is used for transitioning from 42" height rail sections to in-line stair rails.

The Spectrum Rail End Cap, Male is installed on the exposed end of a top rail for a finished look. It features a male connection and is used for capping off top rail ends near and on gates.

The Spectrum 60 Degree Elbow is utilized where rail sections meet at a 60 degree angle. It features a rounded corner and female connections.

The Spectrum 45 Degree Elbow is utilized where rail sections meet at a 45 degree angle. It features a rounded corner and female connections.

The Spectrum Straight Sidemount is installed on the exposed end of a top rail and mounts into a flat wall or column.

The Spectrum EC Post Adapter Plate is on an EC post to accept the Spectrum Top Rail. This plate features a narrow body to fit in the channel on the underside of the top rail.

The Spectrum EC Clamp Stair Knuckle, Wide is used for transitioning from 42" height rail sections to perpendicular stair rails.

The Spectrum Rail Mount Stair Knuckle is an adjustable fitting for transitioning from 36" height rail sections to perpendicular stair rails.

The Spectrum Rail Cap, Notched is installed on the exposed end of a top rail in proximity to gates for maximum clearance. It is used for capping off top rail ends on the gate and on either side of the gate opening.

The Spectrum Wide Splice mates top rail sections. It features a female connection to allow for the Spectrum Top Rail to be cut to length and concealed within the splice.

The Spectrum powder-coated aluminum top rail is available in standard and special Spectrum colors and in lengths of 4', 6' and 8'. It can be cut to length and concealed inside associated fittings for a clean look.

The Spectrum Rail Cap is installed on the exposed end of a top rail for a finished look. It features a female connection to allow for the Spectrum Top Rail to be cut to length and concealed within the cap.

The Spectrum 90 Degree Elbow is utilized where rail sections meet at a 90 degree angle. It features a rounded corner and female connections. The Spectrum Top Rails can be cut to length and concealed inside for a clean look.

The Spectrum Stair Knuckle is an adjustable fitting for transitioning from 36" height rail sections to in-line stair rails.

The Spectrum Clamp Stair Knuckle is used for transitioning from 42" height rail sections to in-line or perpendicular stair rails.

The Spectrum Gate Kit is available for a 36" or 42" height Spectrum Cable Railing System. These gate kits come standard with pre-installed cable and fittings.

The Spectrum Gate Latch Post is used on the latch side of the Spectrum Gate. It available for a 36" or 42" height Spectrum Cable Railing System.

The Spectrum Gate Hinge Post is used on the hinge side of the Spectrum Gate. It available for a 36" or 42" height Spectrum Cable Railing System.

The Spectrum Gate Hardware Kit includes everything needed to properly install a Spectrum Gate onto the Spectrum Gate series Latch and Hinge Posts.

The HandiSwage™ Termination Stud is a “fixed” fitting used in conjunction with a HandiSwage™ Stud on the opposing end of a cable run.