HandiSwage™ Termination Stud
The HandiSwage™ Termination Stud is a “fixed” fitting used in conjunction with a HandiSwage™ Stud on the opposing end of a cable run. It is made from grade 316L stainless steel for corrosion resistance and durability. This stud is designed for use when installing cable on Spectrum Gate series Latch and Hinge Posts. The flat head on the termination stud allows for added clearance when opening and closing the Spectrum Gate. Designed for hand swage use only. Use our Hand Swager to achieve proper crimps.
GRADE: 316L Stainless Steel
| ITEM | A (cable) | B | C | QTY | X (height) | Y (length) | Z (width) | WT (lb) |
| 2 Pack | ||||||||
| C0731-HG0703-2 | 1/8˝ | 0.25˝ | 1.51˝ | 2 | 0.47˝ | 2.00″ | 0.47″ | 0.04 |
| 10 Pack | ||||||||
| C0731-HG0703-10 | 1/8″ | 0.25″ | 1.51″ | 10 | 0.47″ | 2.00″ | 0.47″ | 0.20 |
RELATED PRODUCTS
HandiSwage™ Standard Stud
The HandiSwage™ Standard Stud makes installing an architectural cable railing system quick and easy.
Spectrum Gate
The Spectrum Gate Kit is available for a 36″ or 42″ height Spectrum Cable Railing System. These gate kits come standard with pre-installed cable and fittings.
Spectrum Gate Hinge Post
The Spectrum Gate Hinge Post is used on the hinge side of the Spectrum Gate. It available for a 36″ or 42″ height Spectrum Cable Railing System.
Spectrum Gate Latch Post
The Spectrum Gate Latch Post is used on the latch side of the Spectrum Gate. It available for a 36″ or 42″ height Spectrum Cable Railing System.