RailEasy™ Wedges
The wedges are located in the cone of each RailEasy™ component. These wedges and spacers are required for proper hold on the cable in a stainless steel cable railing system.
GRADE: 316L Stainless Steel
ITEM | A | B | C | D | QTY | WT (LB) |
S0980-0001 | 5/32˝ | 0.28˝ | 0.85˝ | 0.06˝ | 10 | 0.02 |
RELATED PRODUCTS
RailEasy™ Cones
The tensioner cone is where the spacer and wedge are housed.
RailEasy™ Lag Stud
The RailEasy™ Lag Stud is designed for use in short runs and must always be used with a RailEasy™ Tensioner at the opposite end of the cable run.
RailEasy™ Stud
The RailEasy™ Stud is a component of the flat and round base tensioners.
RailEasy™ Stud Assembly
The RailEasy™ Stud Assembly is used on straight and angled runs by drilling through the post and fixing it to the back side.