Spectrum Gate Hardware Kit
The Spectrum Gate Hardware Kit includes everything needed to properly install a Spectrum Gate onto the Spectrum Gate series Latch and Hinge Posts. The simple design allows for installation using simple hand tools. Hinges and Latch are made from heavy-duty polymer and the through-bolt hardware is stainless steel for corrosion resistance and durability. Kit includes (2) hinges, (1) latch, (12) cap screws, (12) barrel nuts
and (12) washers. Designed for use with the Spectrum Gate series only.
MATERIAL: 316 SS & HD Polymer
| ITEM | X (height) | Y (length) | Z (width) | WT (lb) |
| S0905-HDG01 | 6.25″ | 6.25″ | 6.25″ | 2.26 |
RELATED PRODUCTS
Spectrum Gate
The Spectrum Gate Kit is available for a 36″ or 42″ height Spectrum Cable Railing System. These gate kits come standard with pre-installed cable and fittings.
Spectrum Gate Hinge Post
The Spectrum Gate Hinge Post is used on the hinge side of the Spectrum Gate. It available for a 36″ or 42″ height Spectrum Cable Railing System.
Spectrum Gate Latch Post
The Spectrum Gate Latch Post is used on the latch side of the Spectrum Gate. It available for a 36″ or 42″ height Spectrum Cable Railing System.
HandiSwage™ Termination Stud
The HandiSwage™ Termination Stud is a “fixed” fitting used in conjunction with a HandiSwage™ Stud on the opposing end of a cable run.